Wolf Appliance Company High Definition Video Processor DCL-200FD - Manual (Page 7)

AC Input
IR - In
Service
Reset
Component Video Inputs
Composite Video
S-Video
6
Connectivity
Flexible Component Video Inputs
This group of connectors can accept 3 types of analog component video inputs:
Component (YPbPr) (2 Inputs)
This is the most common type of component analog signal. Cables are usually 3 RCA-> RCA type.
RGBHV
RGBHV stands for “Red, Green, Blue, Horizontal Sync, Vertical Sync”.
It is commonlyy used to connect a computer’s analog VGA output using the VGA to RGBHV adapter cable.
The Wolf Cinema ProScaler can accept these formats via RGBHV:
VGA 640 x 480 @ 60 Hz
SVGA 800 x 600 @ 60 Hz
XGA 1024 x 768 @ 60 Hz
SXGA 1280 x 1024 @ 60 Hz
RGB + CVBS
For use with a SCART breakout cable. SCART is primarily a European connector type. CVBS means Composite Video
Broadcast Signal; typically this would be an analog PAL or SECAM signal. Connect the breakout cable to a SCART
connector, then connect Red, Green and Blue to the component inputs, then connect CVBS to the Sync input
horizontally adjacent to the component inputs.
Video Input (yellow RCA connector)
Composite video input. This signal is also known as “base band NTSC” and accepts European analog standards PAL
and SECAM.
S-Video
S-Video is a analog input signal format similar to base band NTSC (or PAL/SECAM), except that the chroma and luma/sync
components are on separate conductors for improved signal quality. If you have a choice between Video or S-Video,
choose S-Video.
HDMI 1-5 (HDMI 6 on Front Panel)
HDMI Video/Audio Output
HDMI Audio Outpute
RS-232 Port GPIO Port
ProScaler
High Definition Video Processor User’s Manual