Westinghouse W31501 - Manual (Page 18)

On-Screen Display
13
EN
GLISH
3.2 OSD Menu Controls
The OSD can be operated using the control panel or the OSD buttons
on the remote control. Refer to the following table for instructions.
Control Panel Remote Control Description
SOURCE
OSD Exit
In OSD mode, use the control panel OSD
Exit button
SOURCE or the remote control
Back button to exit the OSD (from the
Main Menu) or to go back to a prior menu
level (from a submenu).
MENU
OSD Enter
To choose an option from the OSD menu,
select the option with the OSD Item Select
buttons, then press the
MENU button on the
display’s Control Panel or press the OSD
Enter button
on your Remote Control.
OSD Item Select
To navigate the OSD menus, press the Up
or Down channel buttons on the
display’s control panel or the Function up
or Function down OSD Function
Arrows on your Remote Control Unit.
OSD Value Adjust
To adjust the value of a selected option, use
the
or adjust buttons on the Remote
Control, or the or Volume buttons
on the display’s Control Panel. Press + to
increase the value. Press – to decrease the
value
.
nextgen-nt1503.book Page 13 Thursday, December 25, 2003 4:42 PM