Waring Pro MG855 - Manual (Page 6)

6
1. Assemble grinder/feeder
head to motor housing.
2. Insert feed screw into the
grinder/feeder head.
NOTE: Make sure feed screw is
inserted all the way in or cutting
blade will not fit.
3. Assemble cutting blade on the
end of the feed screw with flat
cutting surface facing away
from the feed screw.
4. Place the coarse cutting plate
in the grinder/feeder head.
5. Tighten screw ring onto the
grinder/feeder head. Use
spanner to secure screw ring.
MEAT
GRINDER
6. Place large die-cast hopper
onto grinder/feeder head.
7. Turn unit on.
8. Using pusher, slowly feed
meat cubes.
NOTE: Meats can be seasoned
before or after grinding.
Coarse
Cutting
Plate
MEAT GRINDER
9. Once meat has gone through
grinder, turn unit off. Remove
screw ring, coarse cutting
plate and cutting blade.
MEAT GRINDER
Feed Screw
Grinder/Feeder Head
MEAT
GRINDER
Grinder/Feeder Head
Motor
Housing
MEAT GRINDER
Cutting
Blade
MEAT GRINDER
Screw
Ring
Screw
Ring
Coarse
Cutting
Plate
Cutting
Blade
Spanner
MEAT GRINDER
Pusher
Die Cast
Hopper