Western Digital Studio Edition II User Manual
Page 27
MY BOOK STUDIO EDITION II
USER MANUAL
WD RAID MANAGER FOR WINDOWS – 24
RAID Status Messages
WD RAID Manager reports the following messages depending on the current status
of your drive.
Displayed Status
Text
Description
User Action
Healthy
Array is properly
configured and operating
normally.
None
Setting Mismatched
Drives from different
RAID sets detected in
slots.
Both slots have valid array
configurations, but they do not
agree on the settings and the
device is not able to determine
which configuration is newer.
Install another drive that is not
part of a different RAID array.
Install the original drive that is
part of the RAID array.Create a
new array with the installed
drives.
Degraded
The array configuration is
valid and is currently
RAID1, but one slot is
marked as faulty.
RAID 1 only
Consult the slot status values
to determine which slot is
faulty and replace the drive.
RAID Status
Rebuilding
The array configuration is
valid, but one slot is being
rebuilt from the other slot.
RAID 1 only
Recovering from degraded
mode. Wait for rebuild to
complete. (This may take
several hours.)
Bad
Neither slot contains a
valid array configuration.