Operation summary 19 operation summary 18 – Whistler 200/400 WATT User Manual

Page 11

Advertising
background image

Before attempting to use medical equipment see page 4.

Use only fuses which conform with the design specifica-
tions outlined in this manual.

When operating the inverter with the engine off, start the
engine every hour and let it run for at least 10 minutes to
recharge the battery.

In the event of automatic shut down, turn the inverter OFF
(O) immediately. Do not restart the inverter until the
source of the problem has been identified and corrected.

To avoid battery drain always disconnect the inverter
when not in use.

Do not expose the inverter to moisture.

Avoid placing the inverter near sources of hear or in
direct sunlight.

When in use, make certain that the inverter is properly
ventilated.

Do not use the inverter near flammable materials,
fumes or gases.

Always operate the inverter in accordance with the
instructions in this manual. Failure to do so may result
in property damage, personal injury or loss of life.

OPERATION SUMMARY

19

OPERATION SUMMARY

18

This inverter is designed to be connected to the power
source with the supplied cables or with #8 wire up to 12’
- #4 wire for longer length. When utilizing the supplied
cables do not attempt to modify or lengthen them.

When operating this inverter with equipment or appli-
ances requiring in excess of 150 watts of continuous
load, use the optional hardwire kit (PP010DC - 200 watt
model) or the hardwire cables.

Always make certain that the power cable terminal con-
nections run Negative (-) to Negative (-) and Positive (+)
to Positive (+). Check these connections frequently to
ensure that they are secure.

Make certain the rated power consumption of the appli-
ance or equipment you wish to operate is compatible with
the capacity of your inverter.

If the rated power consumption of the equipment is in the
range of the maximum specified wattage of your convert-
er, test the inverter to ensure that it will operate properly.

This Inverter is not designed to operate heat generating
appliances such as coffee makers, irons, hair dryers, toast-
ers and heaters.

Before attempting to use a battery charger see page 11.

Advertising