White Rodgers 1F95-71 - Manual (Page 29)

29
Program Cooling Temperatures
If outside temperature is below 50
°
F, we
recommend that you remove the thermo-
stat from the wall before proceeding
with the following steps to program
cooling temperatures. Personal injury
or property damage may occur due to
air conditioner compressor operation
in cold weather. A fresh 9 volt Ener-
gizer
® alkaline battery must be installed
to perform off-wall programming. Pro-
gramming away from the wall should
prevent accidental compressor opera-
tion. USE SYSTEM
SWITCH
TO TURN THERMO-
STAT OFF BEFORE REATTACHING THE
THERMOSTAT TO THE SUBBASE!
1. To program cooling temperatures for the
heating/cooling periods you have already
set, press SYSTEM
SWITCH
until COOL appears.
2. Press VIEW
PRGM
once. The Monday heating/
cooling period 1 start time you just pro-
grammed will appear, and the currently
programmed cooling temperature (A or B)
will be displayed.
3. Press or to display the COOL A
or COOL B temperature you want for
Monday’s heating/cooling period 1.
4. Press VIEW
PRGM
, then select Monday’s COOL A
or COOL B temperature for period 2.
5. Repeat steps 3 and 4 for Monday’s heating/
cooling periods 3 and 4.
CAUTION !