Westinghouse LTV-46w1 - Manual (Page 10)

Input connector
1. S-Video Input
Connect an external video device equipped with S-video output.
2. Video Input
Connect an external video device with composite video output.
3. Video & S-Video Audio Input (Right / Left)
Connect an external audio source to this jack (Audio (R/L). This
connection supports either S-Video or Video input.
4. SPDIF Output(optical)
Connect this output to an external stereo audio amplifier, receiver or
surround sound processor with SPDIF optical Input.
5. Audio Output (Right / Left)
Connect this output to an external stereo audio amplifier, receiver or
surround sound processor with R/L audio Inputs.
6. ANT. (RF-input)
Connect the LCD TV to an over-the-air antenna or cable service to
view NTSC or ATSC (HDTV) content.
7. SERVICE
Factory service port
8. VGA Audio IN
Connect to the Audio out (Green) from a computer.
9. VGA
Using a 15-pin VGA cable, connect to a computer or other device
with a VGA output.
10. YPbPr1 Input
Connect external video devices with component output to these
jacks.
11. YPbPr1 Audio Input (Left / Right)
Connect an external audio source to this jack.
12. YPbPr2 Input
Connect an external video device with component output to these
jacks.
13.YPbPr2 Audio Input (Left / Right)
Connect an external audio source to this jack.
14. HDMI-HDCP input
Connect to an external video device such as HD Digital
cable/satellite receiver, HD Set-Top-Box, Media Center PC, or DVD
player.
15. HDMI Audio Input (Left / Right)
Connect the audio input if a DVI-to-HDMI converter cable is used.
16. AC IN (Power)
Connect the power cord from AC IN to a power source .
English
9