Recording a voice tag – BenQ-Siemens M81 User Manual
Page 48
47
Contacts
right page (47)
of EF81 FUG en, A31008-H2640-A1-3-7619 (27.04.2006, 13:51)
© Sie
m
ens AG 20
03, \
\Itl.eu
\c
ot
tbus\
Proj
ekte_30\
Ben
Q
_M
obi
le\
EF81
_KESTR
EL_1
\out-
Template:
X75,
Version 2
.2;
VAR La
ngu
age: en; VAR
issue d
ate
: 06
0317
Recording a voice tag
Record the voice tag in a quiet envi-
ronment. You should speak into
the phone from a distance of about
25 cm. The voice tag may be 3 sec.
long.
F
Open the Contacts tab.
I
Select a contact.
I
Select number input field.
§Options§
Open menu and select
Record voice tag
.
§Start§
Start recording.
A short signal is sounded. An
appropriate prompt appears on
the display. Speak the name (max.
3 seconds). Repeat the name after
playback. A second signal tone is
sounded and you are prompted on
the display.
C
Confirm completed
recording.
If your two recordings are too differ-
ent or if they are too similar to an ex-
isting voice tag, you will be prompt-
ed to repeat recording.
§Retry§
/
§Restart§
Press to start recording
again.
If three attempts fail you have to
start a new voice tag.
If you use voice-activated dialling mainly
with a handsfree set it is useful to record
the voice tag with the handsfree set.
If there is not enough memory for a new
voice tag, a notification is displayed. Con-
firm notification, delete existing tags and
try again.