Whirlpool SB160PEE - Manual (Page 27)

27
PRESS
CLEAN
U S I N G T H E S E L F - C L E A N I N G C Y C L E
To delay the start:
1. Press the Clean button and
press and hold the Up or Down
arrow button until the desired
cleaning time shows on
the display.
• Use 2 hours for light soil.
• Use 3 hours to 4 hours maximum for
moderate to heavy soil.
2. Immediately press the Stop
Time button and press and hold
the Up or Down arrow button to
the new stop time.
The Self-Cleaning cycle will start at a
time equal to the stop time minus the
cleaning time. In the example at the right,
that would be 5:30 minus three hours,
or 2:30.
After the Self-Cleaning cycle
is set:
The LOCKED Indicator Light will come on
15 seconds after you set the cleaning time.
The door cannot be opened when this
Indicator Light is on.
When the Self-Cleaning
temperature is reached:
The Clean and Oven Indicator Lights will
come on to tell you cleaning has begun.
PRESS
STOP
TIME
PRESS YOU SEE
AND HOLD
PRESS YOU SEE
AND HOLD
CLN TIME CLEAN LOCKED
O
N
(example shows 3-hour
cleaning time)
DELAY CLN STOP TIME
DELAY
CLEAN LOCKED
(example shows 5:30 stop time)