Gain/priority link, Freq, Filter type – Waves Multimaximizer L3-16 User Manual
Page 14: In/out
L3-16 User Guide
14
Gain/Priority Link
The
button allows simultaneous control of Gain and Priority retaining a constant offset between
them.
Freq
- Range 16Hz to 20kHz
- Default 100, 200, 400, 800, 1600, 3200
The Freq control sets the frequency for each of the 6 Paragraphic bands.
Q
- Range 0.50 to 2.0
- Default 1.0
Adjusts Q for each of the 6 Paragraphic bands. The higher the Q setting, the narrower the range of
frequencies that is affected.
Filter Type
- Range Bell, Low Shelf, High Shelf
- Default 1
st
band - Low Shelf, Bands 2-5 – Bell, 6
th
band – High Shelf
Selects the filter type for each of the 6 Paragraphic bands. The selected type is indicated by an icon
representing the filter curve.
In/Out
Click the control to switch a Paragraphic band in or out (on/off). When a band is on, its control will
illuminate with the corresponding color of the band marker.