Technical specifications – WiebeTech NBDDV4 User Manual
Page 4
WiebeTech LLC
N o t e b o o k D r i v e D o c k v 4 U s e r M a n u a l
- 4 -
Technical Specifications
Product Codes
NBDDv4, NBDD8v4
Interface
•
FireWire 400 (NBDDv4) or 800 (NBDD8v4) using OXFW911
•
USB 2.0 (backwards compatible with USB 1.1)
Optional Power Supply
100-240VAC +12V / 3A (not included—WiebeTech Part # PWR-3)
Power Input
(+12V): +12V DC Jack
(+12V / +5V): Standard disk drive 4-pin Molex power jack
Power Output
+5V at 0.75A
Power Switch
On / Off
Host Indicators
•
FireWire host attached LED
•
USB host attached LED
Access Indicator
Provides visual indication of hard drive activity
Operating Temperature
50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity
5% to 95%, noncondensing
Bus Powering
Converts FireWire bus power to +5V
Compatibility
2.5” PATA/ATAPI drives
Operating System
•
Windows XP
•
Mac OS X
•
Linux distributions that support FireWire
Shipping Weight
2 pounds (including accessories)
Dimensions
3.2” x 2.2” x 0.95” (81mm x 56mm x 24mm)
Dimensions are exclusive of attached plates, drives, and cables.
Warranty
1-year limited warranty. See warranty statement for details and limitations. WiebeTech
offers free phone support for 90 days after purchase (1-866-744-8722). After 90 days,
email support is available at
.
Notebook DriveDock is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.
© 2007 WiebeTech LLC. All rights reserved.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
Ensure that the bottom plate and case of your attached drive is grounded, either to the DriveDock case or to an Earth ground.
2)
Use a FireWire cable with RFI reducing ferrites on each end.
3)
Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact
for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact
. We
appreciate being able to serve you!