Wasp Bar Code Wasp WPL606 - Manual (Page 9)

2.4 Buttons, Indicators and adjustment knobs
Power Indicator
When the printer is in the power-on state, the Power indicator is lit.
On-Line Indicator
This green On-Line indicator is lit when the printer is ready. The On-Line
indicator blinks when in PAUSE mode.
Error Indicator
The red Error indicator illuminates in the event of a printer error, such as
memory full, carriage open, cutter error and so forth.
MENU/SELECT Button
Press the MENU button to enter printer setup mode. Press the MENU button
again to advance the cursor to the next menu item. (Printer Setup, Sensor Setup,
System Setup, File Setup and Printer Test) For more information, please refer to
Appendix 1 for the structure and operation logic of the menu.
PAUSE/EXE/INC Button
This button combines three functions:
A. PAUSE: If the printer is in the Ready status, pressing the PAUSE:
(1) Stops at the completion of printing of the current label
(2) The On-Line LED flashes, and
(3) The printer holds all data in memory. This allows for trouble-free
replacement of label stock and thermal transfer ribbon. A second depression
of the PAUSE button will restart the printer.
B. EXE/INC (Execute/Increment): If the printer is in the setup mode, Press INC
button to increase the value of parameters. Press EXE to execute the
selected item.
FEED/DEC Button
This button also has dual functions.
Press the FEED button and the printer will advance one label.
Press the DEC button to decrease the value of parameters.
Print Head Lift Lever
When the Print Head Lift Lever is opened, the On-Line LED will be turned off, the
5