Wasp Bar Code CCD Scanner - Manual (Page 7)

Chapter 4
5 4
Your Wasp WCS3900 Series Scanners are ready for use. The default
settings of the scanners have been pre-programmed for the most common
barcode configurations. Use the “Setup & Configuration” sections only to
customize the scanners settings. Please review the “Enable Barcode
Symbologies” configuration beginning on page 14 to see the list of
barcodes symbologies which are enabled by default.
Tip:
• Use the pre-printed "Barcode Test Symbols" in Appendix A on pages
29-31 as a test chart to practice scanning.
Quick Start
USB Connection
PS2 Connection
WCS3900_3905Manual0707_sm.A0 6/25/08 4:32 PM Page 5