Williams Sound CFM 400 - Manual (Page 17)

Williams Sound ®
Helping People Hear
18
If rotational adjustment is required, use a 7/16" open-end wrench to loosen the jam nut
on the ballshaft. Rotate the receiver/ speaker and re-tighten the jam nut.
I NSTALLING THE SS-3 F LOOR S TAND K IT
1. Align the three holes in the MFL 002 flange with the three pre-drilled holes in the
base of the R800 or SPK 800. (See Figure 15.)
2. Secure the MFL 002 flange to the receiver or speaker using the three screws provided.
3. Set the resulting flange/speaker assembly on the threaded top of the STD 003 Floor
Stand and turn until secure. DO NOT OVER TIGHTEN. (See Figure 16.)
Front of R800
Jam Nut
Tension Screw
Head
F IG . 14: B RACKET 012 W ALL M OUNTING
F IG . 15: F LANGE P LACEMENT
Front Of
R800/SPK 800
Flange
Placement
Bottom of
R800/SPK 800
F IG . 16: SS-3 F LOOR S TAND K IT
R800/SPK 800
Flange
Floor Stand