Wadia Digital 302 - Manual (Page 21)

21
SINGLE
To play a Single track first press the Single button (a ONE indicator will
light in the display window), then press the numeric button(s) that
correspond(s) to the track you would like to play.
PROGRAM
The PROGRAM key can be used to create a program to play tracks on
a disc in any order you choose. Programming functions are available
only when the CD is stopped. Follow these steps to create a program:
1. Press the PROGRAM key to enter the programming mode (the
display will indicate Pr).
2. Use the Direct Access Keypad to select a desired track.
3. Repeat until all desired tracks are entered.
4. Press PLAY to hear the tracks in the program order.
5. Pressing Program a second time will return you to the
programming mode where you may check your program.
6. Opening the disc loading drawer or turning the power off will
erase the program.
CHECK
The CHECK key can be used to confirm the tracks in a program, and
the time of each track. While in the programming mode, with each
instance that the CHECK key is pressed the display will indicate the
next programmed track number and track time in the order they were
input into the program.
DELETE
The DELETE key can be used in conjunction with CHECK key to remove
a track in a program. Simply press the CHECK key until the track you
wish to remove appears on the display and then press the DELETE key.
After a track is deleted the display will indicate the total number of
remaining tracks and time in the program.
CLEAR
While in the programming mode, the CLEAR key will erase program
memory and then exit the programming mode.
ENTER
The ENTER Key is available to allow for future updates and upgrades.