Westell Technologies Router 2400 - Manual (Page 70)

030-300331 Rev. A 68 October 2002
4-Port Router (Model 2400) User Guide
9.4 Advanced Service Configuration
To setup additional Service Configuration options go to Configuration at the homepage menu and select Service
Configuration. Click on Advanced Configuration at the Service Configuration screen.
When you click on Advanced Configuration, a Wizard will appear. The Wizard will guide you through the steps of
creating an advanced NAT service entry. You can setup port forwarding and trigger port options as well as enable
Static NAT through the advanced configuration wizard.
NOTE: Westell strongly recommends that you do not change any values in this section. If you experience any
problems, please re-set your Router via the external hardware re-set switch or the procedure defined under the
Maintenance menu.
Well Known Service
This option allows you to Configure Port Forwarding parameters based on
well-known services.
Custom Service This option allows you to customize your Port Forwarding based on your
specific port requirements.
Static NAT This option allows you to set up a Static NAT IP Address.