Setup problems – WiLife V2.5 User Manual

Page 117

Advertising
background image

Troubleshooting

WiLife User Guide

103

Installation Problem

Solution

Camera suction cup comes
free from the window

• Clean the window to ensure an airtight fit.

• With your fingertip, place a very light layer of vegetable or olive oil around the edge of

the suction cup.

• Always use the strain relief mini-suction cup for added safety by attaching it to the

glass and cable.

Setup Problems

Setup Problem

Solution

After a few minutes or even
seconds Command Center
drops my camera

• On older machines (pre 2001), some USB sockets may be underpowered or

incompatible with the USB 1.1 standard. Upgrade your computer by adding a USB 2.0
card or hub.

• Check your firewall settings. Some firewalls close communications after a few seconds

of operations.

The cable connecting the
camera to the power supply is
too short

• You may purchase a longer Ethernet cable or Ethernet Cable Coupler at our online

accessory store.

• Purchase a standard CAT5e Ethernet cable from you local computer accessory retailer

(up to 80 feet). (Note: crossover CAT5 cables will not work with our system.)

My primary camera is shown
in the second camera
position

From the Live Mode, click on a video panel and drag it to the panel you want it to
display. This rearranges camera order.

My cameras are recording too
frequently

• Reduce camera motion Sensitivity on the Setup>Recording dialog.
• Reduce the size or number of motion zones.

My camera is not following my
recording schedule

• Ensure the camera ON/OFF button on the main screen is ON.

• Verify that your computer clock is correct.
• Check your recording schedule to validate the days-of-the-week and times. Remember

12AM is midnight, not noon.

• Check your recording schedules to ensure you do not have overlapping schedules that

conflict.

I do not know my SMTP
account information

• Contact your e-mail provider for details on connecting to their SMTP server. You can

usually find this information on your e-mail provider’s Internet support page.

• Create a new e-mail account using gMail or other e-mail services that supports SMTP

(www.gmail.com).

My alert e-mails are being
rejected because of size

Most e-mail providers limit the maximum size of e-mails and limit the cumulative size of
all e-mails in your system.

• Delete or archive outdated e-mails from your system.
• Contact your e-mail vendor to have them configure your account for larger e-mail

messages.

• Select a smaller alert message type. The “Send Text Message” is smallest and the

“Send Video Frame” e-mail is usually about 50KB.

I am getting too many e-mail
messages

Command Center sends an e-mail alert when a camera detects motion and the length of
the motion meets or exceeds your settings. To reduce the number of messages, you
can:

• Reduce recording events by reducing motion sensitivity or changing motion zones on

the Setup>Recording dialog.

• Increase the Minimum Motion time on the Setup>E-mail dialog.

• Increase the Maximum Frequency time on the Setup > E-mail dialog.

Advertising