Lava Soap 52840 - Manual (Page 21)

• 2 flashes = «The machine does not empty and/or does not spin», follow the corre-
sponding suggestions in «Possible cause/Solutions» box and restart the programme.
Once the problem has been eliminated, press the button 5 to restart the programme. If af-
ter all checks, the problem persists, contact your local Service Centre.
Problem Possible cause/Solution
The washing machine does not start:
The door has not been closed. (Yellow pilot
light of button 5 blinks)
• Close firmly the door.
The plug is not properly inserted in the power
socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installa-
tion.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and
the button 5 has not been pressed.
• Please turn the selector dial and press the
button 5 again.
The delay start has been selected.
• If the laundry are to be washed immediately,
cancel the delay start.
The machine does not fill:
The water tap is closed. (Yellow pilot light of
button 5 blinks)
• Open the water tap.
The inlet hose is squashed or kinked. (Yellow pi-
lot light of button 5 blinks)
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter
are blocked. (Yellow pilot light of button 5
blinks)
• Clean the water inlet filters (see "Cleaning the
water inlet filters" for more details)
The door is not properly closed. (Yellow pilot
light of button 5 blinks)
• Close firmly the door.
The machine fills then empties immediately:
The end of the drain hose is too low.
• Refer to relevant paragraph in «water drain-
age» section.
What to do if… 21