Wilson Car Amplifier - Manual (Page 6)

5
Installing the Wilson SIGNALBOOST™ Amplifi er
Warning: Do not plug in the DC
power supply until the antenna and universal
connector cables are attached to the amplifi er.
!
Select a location to install the amplifi er that
is away from excessive heat, direct sunlight
or moisture and that has proper ventilation.
Recommended installation locations are:
• Under the seat
• Under the dash
Run the cable from the antenna and attach
it to the FME-Male connector labeled
“outside antenna” on the amplifi er.
Attach the universal connector cable to the
extension cable and attach the extension
cable to the FME-Male connector labeled
“Universal Connector” on the amplifi er.
Then attach the universal connector to your
cell phone or data card. (See page 7)
Vehicle Installation