Wacom DTU-1931 - Manual (Page 13)

Your new DTU-1931
Page 9
REAR VIEW
Kensington security slot
Allows easy attachment of a
security cable.
Pen storage compartment
To store, insert one end of the pen into either side of the compartment.
Then gently press the other end of the pen into the compartment.
To remove, press in on either end of the pen. This will pop the opposite end
out of the compartment so you can remove the pen.
Stand adjustment lever
DVI/VGA (digital/analog) switch
Set this switch for the video connection
you will be using.
Video, USB, and power connectors
Stand
Adjusts the tilt angle of the unit.
See Adjusting display incline on
page 10.
Pen tether attachment point
If using a pen tether, connect it to the
attachment point located on the left or
right side of the unit.
IMPORTANT: Always store the pen display on a stable surface or in its original packing carton when
not in use. Be sure to adjust the stand to the low tilt position before packaging the DTU-1931. If you
do not close the stand, the notched mechanism may be damaged during transportation and storage.
Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving the
DTU-1931, always do so by grasping the main body casing.
DTU193_Manual.fm Page 9 Monday, September 15, 2008 2:42 PM