Wasp Bar Code WPL305 - Manual (Page 16)

Wound Type Outside wound.
Width 20mm ~ 112mm (0.78” ~ 4.4”).
Length 10mm ~ 1000mm (0.4” ~ 39”).
25.4mm ~ 1000mm (1” ~ 39”).(for peeler and cutter)
Thickness 0.06mm ~ 0.19mm. (2.3~7.4 mil), max. 150g/m 2
Roll Diameter 5”.
Roll Core Diameter 25.4mm ~ 76.2mm (1” ~ 3”).
Gap Height 2mm min.
Black Mark Height 2mm min.
Black Mark Width 8mm min.
7.3 Ribbon Specifications
Item Specification
Type Wax, Wax / Resin, Resin.
Core Diameter 1".
Width Max 110mm.
Capacity 300m with 1" core.
Wound Type Outside wound.
Ribbon End Clear or silver end tape.
7.4. LED and Button Operation
LEDColor Description
Green
Orange
Red
The power is on and the device is ready to use.
The system is detecting the paper and ribbon status.
Printing error, such as paper empty, ribbon empty,
cover opened, etc.
8. Product Support
If you experience any problems with your Wasp printer that you are unable to resolve,
use our online support site to register then call for technical assistance at (214) 547-
4100, Monday through Friday, 8:00 AM – 5:00 PM Central Standard Time. You must
register to be eligible for technical support. Our web site is
www.waspbarcode.com
You may also contact us in writing at:
Wasp Technologies
1400 10
th Street
Plano, TX 75074
(214) 547-4100
(214) 547-4101 Fax
9. Warranty Information
Wasp printers are warranted against defects in workmanship and materials for a
period of one year from the date of shipment, provided that the product remains
unmodified and is operated under normal and proper conditions.
Note: Print heads are warranted for 90 days against defect in workmanship. Print
heads will be replaced during the 90 day period once it is determined that the
print head is defective.