Care and cleaning, Recipes – Wolfgang Puck WPSSCO24 User Manual

Page 10

Advertising
background image

17

18

Care and Cleaning

1

Turn the Temperature Control to “0” and the Time Control to “Off”
and unplug before cleaning.

2

Allow oven and accessories to cool completely before cleaning.

3

Clean the outside of the oven with a damp cloth and dry thoroughly.
Clean stubborn stains with a nonabrasive liquid cleaner. Rinse and
dry thoroughly. Do not use metal scouring pads or abrasive cleaners
that will scratch the surface.

4

Clean the glass door with a cloth or sponge dampened with warm,
sudsy water and dry thoroughly.

5

Wash the baking racks, broil rack, crumb tray, and drip/roasting/
baking pan in hot, sudsy water or in the dishwasher. DO NOT use
abrasive cleaners or metal scouring pads to clean the oven rack,
broiling/roasting rack or drip/baking pan. Clean stubborn stains with
a nylon or polyester mesh pad and a mild, nonabrasive cleaner. Rinse
and dry thoroughly.

6

The walls on the inside of the oven have a nonstick coating which
allows food particles or spatters during oven use to be easily wiped
clean. Remove heavy spatter after use with a nylon or polyester
mesh pad, sponge or cloth dampened with warm water. Blot dry
with a paper towel or soft, dry cloth.

7

DO NOT use cleaning agents, cleansers or metal scouring pads on
the nonstick coating as this may reduce its effectiveness.

8

The Rotisserie spit and forks (without screws attached) can be
placed in the dishwasher or washed in warm soapy water. Handwash
the screws in warm soapy water and dry thoroughly.

Replacing the light bulb

The light bulb inside the oven can be replaced if it burns out. New light
bulbs may be obtained by calling the toll-free number on the back of
this manual. To remove the old light bulb, unplug the power cord from
the outlet, ensure that the oven has completely cooled. Loosen the
screw on the light bulb cover on the upper rear corner of the right
interior wall. Remove the cover. Turn the bulb counterclockwise to
remove. Place the new bulb in the socket and turn the bulb clockwise
to tighten. Replace the light bulb cover and tighten the screw.

Recipes

FG_24LConvecOvenmanual 10/11/06 2:26 PM Page 19

Advertising