Steamer module specifications, Installation specifications – Wolf IS15/S User Manual
Page 7
Steamer Module Specifications
7
wolfappliance.com/specs
Installation Specifications
MULTIPLE COOKTOP INSTALLATION
If the steamer module is to be used in combination with
additional cooktops or modules with a filler strip, refer to
the chart below for the countertop cut-out width. The
dimensions are derived by adding an additional 1
1
/
4
"
(32)
for each additional unit, to give you the total countertop
cut-out width. Dimensions include the filler strip.
When multiple cooktops are installed side by side, each
unit must have its own separate, recommended electrical
circuit.
When two or more cooktops or modules are installed
together, an integrated module filler strip is recommended.
The filler strip and other accessories are available through
your authorized Wolf dealer. For local dealer information,
visit the find a showroom section of our website,
wolfappliance.com.
IMPORTANT NOTE:
Review specific installation instruc-
tions for product to product capabilities.
Multiple Cooktops
COUNTERTOP CUT-OUT
WIDTH
2 Modules
29
1
/
4
"
(743)
3 Modules
44
1
/
2
"
(1130)
4 Modules
59
3
/
4
"
(1518)
30"
(762)
Cooktop / Module
44
1
/
4
"
(1124)
30"
(762)
Cooktop / 2 Modules
59
1
/
2
"
(1511)
36"
(914)
Cooktop / Module
50
1
/
4
"
(1276)
The steamer module must be installed at least 15"
(381)
from a Wolf fryer module. Contact between water and
hot oil may cause burns from steam and hot oil.