Waring MG800 - Manual (Page 6)

5
1. Attach grinder/feeder head
to motor housing.
Grinder/Feeder Head
Motor Housing
2. Insert feed screw into the
grinder/feeder head.
NOTE: Make sure feed screw is
inserted all the way in or cutting
blade will not fit.
Feed Screw
Grinder/Feeder Head
3. Attach cutting blade on the end
of the feed screw.
Cutting Blade
4. Place the coarse cutting plate
in the grinder/feeder head.
Coarse Cutting
Plate
6. Place large die cast hopper
onto of grinder/feeder head.
7. Turn unit On.
8. Using pusher, slowly feed meat
cubes.
NOTE: Meats can be seasoned
before or after grinding.
Pusher
Die Cast
Hopper
9. Once meat has gone through
grinder, turn unit off. Remove
screw ring, coarse cutting plate
and cutting blade.
Coarse Cutting
Plate
Screw Ring
Cutting Blade
5. Tighten screw ring onto the
grinder/feeder head. Use
spanner to secure screw ring.
Screw Ring
Spanner