Worksaver EM/2 60 - Manual

Finishing Mower
Rear Discharge
Cut your lawn grooming task down to size with Worksaver
high capacity finishing mowers. The models EM/2 60 (5 ft.)
and EM/2 72 (6 ft.) allow close mowing to shrubs and
buildings for faster yard maintenance. Either side may be
used for close trimming, which isn't available on side
discharge systems.
Rear discharge is standard, which is a huge advantage for
eliminating grass buildup in uncut areas, reduces blade wear
and fuel cost. High lift blades lift the grass and cut it cleanly
discharging it neatly to the rear of mower path. The wide
discharge throat provides an unobstructed flow of cut
material.
Four caster gauge wheels adjust the cutting height and
allows the deck to float with the ground contour. Solid
rubber flotation tires are not effected by punctures or tire
pressure loss, ensuring level cut every time.
Built rugged for long economical operation, these mowers
will leave your lawn areas with that professionally groomed
look neighbors will admire.
SPECIFICATIONS
Model: EM/2 60 EM/2 72
Max. Horsepower: 35 hp 35 hp
Cutting Width: 60 inches (5 ft.) 72 inches (6 ft.)
Overall Width: 62 inches 75 inches
Cutting Height: 3/4" minimum to 5" maximum
No. of Blades:
Blade Size:
3
2" x 20 3/8" Hi Lift
3
2" x 25 1/8" Hi Lift
Blade Tip Speed: 14,420 fpm 15,070 fpm
Blade Spindle: Greaseable - Ball Bearing
Belt Drive: V-belt (B-77) V-belt (B-90)
Deck Thickness: 8 gauge
3 pt. Hitch: Free-Floating Cat. I
Gauge Wheels: 3" wide x 8" diameter - solid rubber - caster
Wheel Spindle: Greaseable Sealed Bearings
Gearbox: 1:2.83 ratio - Cast Iron Housing with Beveled Gears
PTO Driveline: Quick Coupler Series 3 metric (540 rpm)
Grass Discharge: Rear discharge with wide 34" throat Rear discharge with wide 44" throat
Shipping Weight: 448 lbs. 530 lbs.
Computer #: 650950 650960
FEATURES
ü Close mowing
ü High capacity cutting
ü Rear clipping discharge
ü Wide discharge throat
ü 3 Hi-Lift cutting blades
ü Economical to operate
ü Easy maintenance
ü Floating 3-pt. hitch
ü Solid wheels and tires
ü Easy height adjustment
ü High blade tip speed
ü Greaseable blade spindle
ü Quick coupler PTO
ü Cast iron gearbox
ü Beveled gears
DO NOT RIDE, STAND, OR
SERVICE IF ENGINE RUNNING.
READ AND UNDERSTAND
OPERATOR'S MANUAL BEFORE
OPERATION.
INFORMATION PROVIDED BY: