West Bend MCD 289 - Manual (Page 4)

4
A
SSEMBLING
Y
OUR
B
LENDER
Please check all packaging material carefully before discarding. Accessory
parts may be contained within the packaging material.
Caution: Follow these important steps to
assemble, tighten and mount blending jar quickly
and correctly. Injury may result if moving blades
are accidentally exposed. Unplug appliance from
electrical outlet before assembling, removing, or
cleaning. Never place motor base or cord in water
or any other liquids.
1. Put the seal ring on the outer rim of the blade
base.
2. Thread blade base to jar.
3. Place assembled blending jar onto motor base
with handle to the right. Be sure the bottom of
attached blade base assembly is sitting flat on
the motor base. Turn clockwise to lock in
place.
4. Place lid on top of blending jar; turn clockwise
to lock in place. Insert stir stick, or place lid
cap in center of lid and turn clockwise to lock in
place.
5. Your blender is now ready for use.
U
SING
Y
OUR
B
LENDER
1. Make sure blender is unplugged. Place blender motor base on a clean, dry
surface.
2. Place the blending jar onto the motor base and turn counter-clockwise to lock
into place.
3. Add ingredients to the blending jar and replace the lid. Lock lid in place by
turning clockwise.
4. Before starting, insert the stir stick or lid cap in center of lid. Place hand on the
stir stick knob or rest it on jar cover when starting and running motor. When
using the stir stick turn the stir stick counter-clockwise to thoroughly mix the
ingredients.
5. You may add more ingredients through the hole in the center of the lid. When
finished adding ingredients, cover the hole with the lid cap, and then plug cord
into outlet.
6. Always operate blender on a clean, dry surface to prevent air from carrying
foreign material or water into the motor.