Windster WS-38 - Manual (Page 15)

1. Position the hood in place so that :
2. Adjust the hood so the front is flush with the cabinet front.
a. The electrical line is routed through the appropriate Knockout
opening. This step will have to be accomplished while positioning
the hood (Fig.10)
b. The large part of the keyhole mounting slots on the hood fit onto
the hood mounting screws projecting from the bottom of the
cabinet. (Fig.11)
3. Tighten the hood mounting screws all the way into the cabinet or into
the 1" x 2" wood strips so the hood is secure.
Fig.10
Color:
green/white/black
Knockout opening
M. Mounting Range Hood To Cabinet
13
Fig.10
Fig.11
Fig.11
NOTE : Read “Remove and Reinstall Baffle filter” & “For mounting under cabinet”
on page 8.