Whirlpool Whispure Air Purifier - Manual (Page 4)

4
INSTALLATION REQUIREMENTS
Electrical Requirements
Electrical Connection
To properly install your air purifier, you must determine the type of
electrical connection you will be using and follow the instructions
provided for it here.
■ The air purifier should be connected to a 115 V, 60 Hz, 15- or
20-amp fused 3 prong grounded outlet.
■ The use of a time-delay fuse or time-delay circuit breaker is
recommended.
Location Requirements
■ You will need a level surface at least 6" (15.2 cm) from heat
sources such as ranges or heaters.
■ Do not block air openings or place the air purifier on a soft
surface such as a bed or sofa.
■ Operate indoors only.
AIR PURIFIER USE
NOTE: Before operating the air purifier, record the date of installation on the HEPA filter. Under normal conditions, the HEPA filter should
be replaced annually, and the pre-filter should be replaced every 3 months. To remove and replace either filter, see “Filter Replacement”
in the “Air Purifier Care” section.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Do not use an extension cord.
Do not use an adapter.
Do not remove ground prong.
A. 6" (15.2 cm) min. clearance
A