Westinghouse WST3028 - Manual (Page 10)

Preset Functions
NOTE: All of the functions, except for the
toast function, are programmed with a
default time and temperature. The default
time may be changed by turning the
Time/Toast Color Dial. No preheat is
necessary.
1. Plug unit into a 120 V outlet. Place Wire
Rack into desired Shelf Position. Close
the Glass Door. The Operation Light and
the Display Window will illuminate while
the unit is plugged in.
2. Press the Function Button until the
pointer is next to the desired cooking
function.
3. The default time will appear in the
Display Window under the Timer section.
To change the time, turn Time/Toast
Color Dial to select the desired time. The
time will go up or down by 1 minute at a
time. The maximum time is 120 minutes
(2 hours).
Note: Some foods will cook up to 30%
faster than the package time. Set the
timer for lesser time, check food and
continue cooking if necessary.
4. Open the Glass Door and place your
food in the Lightwave Toaster Oven.
Close Glass Door.
5. Press the Start/Stop button. The Timer
will begin to count down and “min.” will
flash in the Display Window.
6. Condensation may build-up on the
inside of the Glass Door, but will
evaporate during Preset Function.
7. The Lightwave Toaster Oven will beep 5
times when the program is complete.
8. Open the Glass Door. Using oven mitts
remove hot pan, Wire Rack and food.
Close Glass Door.
9. Unplug oven and allow to cool
completely before cleaning. See User
Maintenance Instructions. Unplug when
not in use.
NOTE: To change cooking time during
baking process, you must start the
programming sequence over. Press and
hold the Stop button until beep is heard.
The default time will appear in the
Display Window. Reprogram the time
and/or function and press the Start
button to resume the cooking process.
Hints For Cooking
• Heavy-duty aluminum foil may be used to
cover top of baking container to reduce
over browning. Tuck ends of foil closely
against edge of pan.
• Place food in the center of the Lightwave
Toaster Oven for better browning.
• Food may cook faster than recipe or
package time. Check for doneness prior to
end of cook time.
• Rotate and turn food over for more even
browning halfway through the cooking
process.
• To prevent heat loss, avoid opening the
Glass Door excessively.
• For best results, foods that contain a
leavening agent should be baked on the
lowest Shelf Position of the Lightwave
Toaster Oven.
• Always use the Broil Inserts and
Bake/Broil Pan with the Broil function.
Before First Use (cont’d)
11. Set the Timer by turning the Timer/Toast
Color Dial until 15 min. displays under
Timer in the Display window.
12. Press the Start/Stop Button and the
Lightwave Toaster Oven will begin the
Casserole Function process. A small
amount of smoke and odor may be
detected. This is normal.
13. Condensation may build-up on the
inside of the Glass Door, but will
evaporate during the Casserole
Function.
14. The Lightwave Toaster Oven will beep
when the Casserole Function is
complete.
15. Unplug oven and allow to cool
completely before cleaning.
16. To avoid scratching, marring, or
discoloration, do not store anything on
top of the Lightwave Toaster Oven
during operation.
See User Maintenance Instructions.
Unplug when not in use.
CAUTION: Appliance surfaces are hot during
and after use.
CAUTION: Always wear protective, insulated
oven mitts on hands when touching hot
Lightwave Toaster Oven or hot dishes and
food or when inserting or removing Wire
Rack, Broil Inserts, Bake/Broil Pan and
Crumb Tray.
Lightwave Toaster Oven Tips
• The Lightwave Toaster Oven has preset
temperatures for each function to cook
frequently prepared foods. The
temperature can not be adjusted.
• The Lightwave Toaster Oven has a 2 hour
timer.
• The Operation Light on the Control Panel
will be on while the unit is plugged in.
• The oven will beep 5 times when the
program is completed.
• The Lightwave Toaster Oven will
automatically shut off once the timer has
reached 0. The Operation Light and
Display Window will remain illuminated
while the unit is plugged in.
• The Lightwave Toaster Oven may be shut
off at anytime during any function. To
interrupt a function, press and hold the
Start/Stop button until the unit beeps and
shuts off.
• The Heating Elements also function as an
interior light. During all functions, except
the Broil Function, the Upper and Lower
Heating Elements will cycle on and off.
During Broil Function, only the top element
will cycle on and off.
9 10
WST_WST3028_IB_25-5-04 05/25/2004 21:40 Page 11