Wolverine 8000 - Manual (Page 6)

FlashPro 8000
10
3-3 Downloading or Editing the files on PC
! Power on the FlashPro 8000
! Connect the FlashPro 8000 and PC with the provided USB cable
! Double Click the " My computer" icon , the operating system will
display 2 "Removeable Disks " icons and 1 fixed disk icon identifying the
media types correspondingly.
! You can then read ,write,copy ,delete and remove data on the PC.
! All the files download from PC will be stored under the path named “ FILE “ on FlashPro
8000.
! When FlashPro 8000 begins connecting to the computer, the "USB attached “
message will appear in the bottom of the screen. During file transfer in the
PC mode
DO NOT :
1. Plug out the USB cable
2. Remove memory card(s) from the card slot, otherwise, there may be a
chance of lost or corrupt data.
Note: (1) Keep it plugged into the AC adapter/charge while connected to your
computer.
(2) To safely disconnect the FlashPro 8000 from computer, click on the system
tray remove icon and wait until you get a message saying that
you can safely unplug the device before disconnecting the USB cable.
Language Setting:
1. Press [ MENU ] button to open function menu .
2. Scroll to
3. Use the [ ! ] or [" ] buttons to select language , the language options included:
English , Korean, Chinese , Japanese.
Macintosh MacOS 9.x
Follow the installation instructions to being installing drives. 2
Insert your driver Installation into your CD-ROM drive and double click on "My
computer" Browse your CD-ROM drive to "MacOS Installer".
1
Res Restart your computer after installation is complete. 3
FlashPro 8000
19
8. Recording:
- You can press the “Record” button anytime to start recording. However,
you are not able to record voice streams and listen to music at the same
time. You are able to listen to FM radio and record radio show at the
same time but unable to record voice.
- Adjusting the volume to the right values is very important for usable recordings,
it is better to choose a middle-way so the signal is not too loud and gets clipped but not
too silent to get lost in the noise of the hardware.
- To get a better recording performance, it is recommended to use the 2.5” HDD with
Fluid Dynamic Bearing (FDB) motor which provides the quiet operation
Recording FM radio show
1. Scroll to [ Radio ] and press [Ok ]button
2. Use the [ # ] or [$] buttons to finding a desired channel. .
3. Press and hold the [Ok] button for more than 0.5 seconds , the recording function will be
performed.
Note:
! FM recordings are saved in MP3 format and named sequentially,
as FMRCXXXX.MP3 .
! Volume control is able to adjust while recording.
! All recording files are saved into RECORD Folder under FILE Mode.
Recording from built-in microphone
1. Scroll to [REC ] and press [Ok ]button
FlashPro 8000
12
5. Use [ OK ] or [ ESC ] button to back to previous mode
! All files transfered from each memory card are stored onto the Hard Disk in folders
numerically, under the name "CFC0001 " , " MSC0001" , "SMC0001" , "SDC0001".
! When the same card was inserted and copied twice, two different folders were created,
FlashPro 8000 won't overwrite the folder.
! To stop the data transfer , just depress the “ESC “ button and the ,
“COPY STOP “message will pop on the screen , then you can switch off the device or
press “ ESC “ button to switch to main menu .
! All recording files are saved into BACKUP Folder under FILE mode.
5. File Manager
1. Switch on your FlashPro 8000.
2. Scroll to [ FILE ] and press [ OK ] button
3. Use the [ ! ] or [ " ] buttons to high-light a folder or a file.
4. Press [Copy] button to open file manager
Item Description
Info. Shows the last working result.
____________________________________________________________
Copy Allows you copy select files or folder
Paste Allows you paste select file or folder
Delete Allows you delete select file or folder
Cut Allows you move select file or folder
5-1 Copy and Paste a file/folder
You can only copy data from HDD to memory card(s) or from memory card(s) to HDD.
1. Switch on your FlashPro 8000
FlashPro 8000
17
Speed Control
1. Switch on your FlashPro 8000.
2. Press [ MENU ] button to open function menu .
3. Scroll to
4.Use the [ ! ] or [" ] buttons to adjust the speed.
Display the Lyric
1. Switch on your FlashPro 8000.
2. Press [ MENU ] button to open function menu .
3. Scroll to
4. Use the [ ! ] or [" ] buttons to set your lyric at enable or disable mode
ID3 Tag
1. Switch on your FlashPro 8000.
2. Press [ MENU ] button to open function menu .
3. Scroll to
4. Use the [ ! ] or [" ] buttons to set ID3 at enable or disable mode
Note: The ID3 is disable when the Lyric mode is ON.
A-B Repeat function (Cyclically replaying user-defined sections
of a song)
1. When listening to music, press the “AB” button to set the starting point
2. Press the “AB” button again to set the ending point. The FlashPro 8000 will play the
section cyclically.
3. Press the “AB” button again to return normal playback mode