Westell Technologies WireSpeed ADSL Modem 030-300166A iii - Manual (Page 6)

WireSpeed ADSL Modem
User Guide
030-300166A 3 WireSpeed Installation
6. The Link LED should be solid green indicating that the modem connection has been made. (See Figure 3.)
7. During use, a pulsing yellow Activity LED indicates that data is being transmitted and received on the Ethernet
interface.
8. Proceed to “Setting Up Your WebShare Account” on page 11 to configure the software.
ADSL LINE
ETHERNET
POWER
CONNECTOR
ON/OFF
SWITCH
Figure 1. WireSpeed Single-User Setup Connections
Cable Connectors
There are connectors on the side panel of the WireSpeed (Figure 3) for Power, an ON/OFF switch, 6-pin RJ-11 DSL
(LINE) connector and 8-pin RJ-45 ETHERNET connector for customer terminal equipment. Tables 1-3 list the connector
types and pinout designations.
POWER
CONNECTOR
I O
DSL CONNECTOR
10Base-T
CONNECTOR
POWER
SWITCH
LINE ETHERNET
Figure 2. WireSpeed Modem (Connector Panel)