Weed Eater 532 43 46-60 - Manual (Page 9)

9
COUNTERWEIGHT (See Fig. 9)
1. Lower mower to lowest position to allow access to front
axle.
2. Turn steering wheel all the way to the right, for access
to left side of axle
3. With extension and socket, insert bolt, lock washer,
and washer through hole in axle.
NOTE: Insert hardware from rear of axle.
4. Hold counterweight up to axle and start threading
bolt.
5. Repeat steps 2-3 from right hand side.
IMPORTANT: Torque bolts until tight.
LEVEL MOWER DECK
Ensure deck is properly leveled for best mower per for mance.
See your riding mower owner's manual for instructions.
10 9
WASHER
LOCKWASHER
BOLT
COUNTERWEIGHT
Fig. 9