Wadia Digital 860 - Manual (Page 11)

WADIA 860 COMPACT DISC PLAYER
Turn-on Screen
Input Screen
Volume Screen
How to Change
between Display
Screens
DISPLAY FUNCTIONS
The Wadia 860 Compact Disc Player features a two part display screen. The
top section shows the status of the CD transport. The bottom of the display
indicates preamp functions.
This screen is displayed each time the Wadia 860 is powered-up. After five
seconds, the display will change to the Input Screen with CD input selected,
then change again to the Volume Screen with the volume set to Zero.
C D
The Input Select screen will show the status of the signal connected to the
currently selected input. The Input Screen will display the sampling rate
and indicate if the signal is phase inverted. If there is nothing connected
to selected input, the display will indicate this by showing, “No Data.”
I
K H Z
N D
The Volume Screen shows the right and left channel volume level. If the
output is muted, the display screen will indicate this by showing, “MUTE.”
During normal listening, the display will show the volume screen. If a new
input is selected, the screen will change to show the Input Screen for five
seconds before returning to the volume screen.
L E F T L E V E L R I G H T
R I G H T
Pressing the Enter key will cause the display to change to whichever screen
is not currently displayed. For example, if the Volume Screen is currently
being displayed, pressing the Enter key will change to the Input Screen.
Also, the Wadia 860 will automatically change screens if a key is pressed
that changes information displayed on a different screen. For example, if the
Volume Screen is currently being displayed, selecting a different input will
change the display to the Input Screen.