Westinghouse LTV-27w7 HD - Manual (Page 14)

13
English
4. Connect power cables
Connect the power cord to the LCD TV then to a properly grounded AC outlet.
I MPORTANT: The power input voltage for LTV-27w7 HD and LTV-32w6 HD is
120VAC, 60 Hz ONLY, Before beginning, make sure all devices are turned off.
5. Turn Power On
Press the Power button on the right side of the LCD TV, or press the Power (Red)
button on the remote control.
6. Select input source for the LCD TV using the OSD menu or remote
control
7. If connecting to Antenna, Cable or other RF source on TV Inputs:
See page 17 to auto scan and edit available channels.
8. If connecting to a PC (VGA):
For the best picture quality, set the timing mode of you computer to 1360 x 768 at 60Hz.
Refer to the graphic card’s user guide of your computer to set this timing mode.