2 controls, Low level, High level – Waves Dynamics Processor MV2 User Manual
Page 8: Ouput gain, Output meters, Cut / boost meters
3.2 Controls
Low Level
Sets the low level compression threshold. Compression is applied to signals below this
threshold. (From bottom up)
Range: 0 to +48 dBFS
High Level
Sets the high level compression threshold. Compression is applied to signals above this
threshold. (Top down)
Range: 0 to -48 dBFS
Ouput Gain
Range: 0 to -48 dBFS
Output Meters
Range: 0 to -60 dBFS
Cut / Boost Meters
Display the amount of gain cut and/or boost.
Attenuation is displayed from the top down.
Boost is displayed from the bottom up.
Numeric indicators which display the maximum cut and boost are displayed below the
meters.
Reset these values by clicking anywhere on the meter.
The meters display up to -48 dB of attenuation and +48 dB of gain boost.
MV2 User Manual
8