White-Westinghouse WM50T-1 - Manual (Page 27)

FAILURE
CODE FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
Err 05
The start/pause
light and program
end light blink.
The heater of your
machine or the
heat sensor has
failed.
Shut down your
machine and
unplug. Turn off
your tap and apply
to the nearest
authorized service.
Err 06
The program
ready light and
program end light
blink.
The motor has
failed.
Shut down your
machine and
unplug. Turn off
the tap and apply
to the nearest
authorized service.
Err 07
The program
start/pause light,
ready light and
program end light
stays on
permanently.
Configuration
error.
Shut down your
machine and
unplug. Turn off
the tap and apply
to the nearest
authorized service.
Err 08
The start/pause
light,program
ready light and
program end light
blink.
Fault error
Shut down your
machine and
unplug. Turn off
the tap and apply
to the nearest
authorized service.
Err 09
The program
ready light and
program end light
stays on
permanently.
The network
voltage is too high
or too low.
If the network
voltage is lower
than 150V or
higher than 260V,
your machine will
automatically stop.
When the network
voltage is
recovered, your
machine will
continue its
operation.
53