Walker MDD - Manual (Page 68)

66
Use only genuine Walker ® replacement parts. Effective Date 03-01-06
ITEM LOCATION LUBRICATION NO.
NO. TYPE PLACES
ITEM LOCATION LUBRICATION NO.
NO. TYPE PLACES
LUBRICATION POINTS
Lubrication Points
1 Deck Caster Wheel Fork Pivot Grease 2
2 Blade Drive Gearbox Oil * 2
3 Tee Gearbox, Deck Oil * 1
4 Deck Caster Wheel Bearing Grease 2
5 Universal Joint Shaft Assembly Grease ** 1
6 Pivot Assembly, Tilt-Up Deck Grease 4
7 Deck Support Arm Socket Grease 2
8 Body Hinge Point Oil 2
9 FSC Actuator Rod Pivot Pins Oil 2
10 FSC Lever Pivot Grease 1
11 FSC Lever Fork Grease 1
(Grease Slide Area)
12 Steering Lever Pivot Grease 4
13 Deck Support Arm Pivot Grease 2
14 Deck-to- PTO Coupling Grease 1
(Grease Slide Area)
15 Universal Joint Tube Assembly Grease ** 1
16 Universal Joint Quick Connect Grease 1
Spline (Grease Slide Area)
17 Parking Brake Lever Grease 1
18 Gear Axle Oil *** 2
19 Belt Tightener Pivot, Grease 1
Ground Drive
20 PTO Clutch Lever Pivot Grease 1
21 Clutch Actuator Push Rod Grease 2
22 Brake Actuator Rod and Brake Oil 3
Band Pivot Pins (Clevis)
23 Throttle Control Cable Ends Oil 2
24 Cold Start Lever Grease 1
25 Catcher Hinge Point Oil 2
26 Rear Wheel Bearings Grease 2
27 Engine Dipstick / Oil Filler Oil *** 1
28 Belt Tightener Pivot, Grease 1
Blower Drive (GHS Model Only)
29 PTO Gearbox Dipstick Oil *** 1
30 Hydrostatic Drive Oil *** 2
31 (FSC) Friction Body Pivot Grease 1
32 Throttle Control Pivot Oil 1
* Gearboxes are permanently lubricated and sealed requiring
no scheduled lubrication. Oil level should be checked only
when an oil leak is noted.
** Grease every eight (8) hours.
*** See Owner’s Manual for procedure for checking and chang-
ing oil in Engine Crankcase, Hydrostatic Transmissions and
Gear Axles.
NOTE: See Model MDD Owner’s Manual (P/N 7000-8)
for proper lubrication intervals.
NOTE: DGHS42 Tilt-Up Mower Deck is shown for reference. For
other Mower Deck Lubrication Points, Refer to Carrier
Frames and Mower Decks Illustrated Parts Manual.