West Bend Smoothie Signature II - Manual (Page 6)

6
C
LEANING
Y
OUR
S
MOOTHIE
S
IGNATURE
™
II
1. Switch to “OFF” and unplug from the electrical outlet.
2. Wipe the motor base with a damp cloth or sponge. To remove stubborn spots,
use a mild, non-abrasive cleanser.
3. Remove the blade assembly and rubber gasket from the blending jar. Unscrew
and disassemble the dispensing valve. Carefully wash all parts except the
motor base in warm, soapy water, rinse and dry thoroughly. To prolong the life
of your smoothie maker, do not wash any parts in the dishwasher.
CLEANING THE DISPENSING VALVE
1. Remove the valve from the blending jar by unscrewing the entire valve counter-
clockwise.
2. Remove the cap from the valve body by unscrewing it counter-clockwise.
3. Squeeze cap and stopper together and slide the lever off the stopper pin.
4. Remove the spring.
5. Remove the stopper and stopper pin by pulling the rubber rim of the stopper.
The stopper and pin are tightly fit and need not be separated.
6. Clean all parts in warm, soapy water, allow to dry thoroughly and reassemble in
the order shown.
Lever
Cap
Spring
Stopper Pin
Stopper
Valve Body