White Z-165 - Manual (Page 25)

25
REF.
NO.
PART
NO. DESCRIPTION
1 732-0556 Extension Spring .94 OD x 7.57 Lg
2 712-3006 Hex Nut 1/4-20
3 710-0597 Hex Cap Screw 1/4-20 x 1.0
4 712-3004A Flange Lock Nut 5/16-18
5 703-2559 Stop Bracket
6 703-2945 LH Pulley Cover
7 754-3091 V-Belt
8 732-0602 Torsion Spring
9 726-0106 Speed Cap Nut
10 710-0751 Hex Cap Screw 1/4-20 x .620
11 736-0270 Bell Washer .265 OD x .75 ID
12 711-0792 Hinge Pin .25 Dia. x 6.75 Lg
13 703-1693 Hinge Mounting Bracket
14 731-1032 Deflector Ass’y Chute
15 603-0316 Deck Ass’y
16 711-3314 Roller Pin
17 731-3005 Roller
18 703-3237 RH Pulley Cover
19 756-3089 Pulley 4.0 Dia
20 710-1336 Spindle Bolt 3/4-16 x 4.25
21 737-3000 Grease Fitting 3/16
22 603-0580 Engag Rod Ass’y
23 618-3129 Deck Spindle Ass’y
24 732-0851A Extension Spring .75 OD x 8.63 Lg
25 738-0213 Shoulder Screw .498 x 1.45 Lg
26 736-0192 Flat Washer .531 OD x .93 OD
27 747-3013 Support Mower Pin
28 715-3003 Spirol Pin
29 732-0802 Compression Spring .63 OD x 6.3 Lg
30 736-0160 Flat Washer .536 ID x .930 OD
31 750-0151 Spacer .550 ID x .750 OD
32 711-3358 Deck Roller Pin
33 712-0431 Flange Lock Nut 3/8-16
34 736-0258 Flat Washer .385 OD x 1.0 OD
35 710-3151 Hex Cap Screw 5/8-18 x 4.25
36 756-0627 Flat Idler Pulley 3.5 OD
37 736-0290 Flat Washer 5/8 ID x 1.0 OD
38 741-0524 Bearing .625 ID x 1.574 OD
39 716-3020 Snap Ring
40 712-0239 Lock Nut 1/2-20
41 736-0179 Flat Washer 1/2 ID x 1.25 OD
42 736-0188 Flat Washer .76 ID x 1.49 OD
43 741-0338 Flange Bearing 3/4 ID x .52 Lg
44 732-0850 Extension Spring 1.0 OD x 6.140 Lg
45 750-0656 Spacer .50 OD x .75 ID
47 603-0581 Pivot Arm Pulley Ass’y
48 736-0100 Flat Washer .531 ID x 1.25 OD
49 603-0584 Deck Plate Ass’y
50 736-0187 Flat Washer .64 ID x 1.24 OD
51 710-3037 Hex Cap Screw 3/8-16 x 1.75
52 738-0988 Shoulder Spacer .875 Dia x .245
53 703-3147 Idler Pivot Arm
54 750-3164 Spacer .635 ID x 2.0 Lg
55 756-3103 Pulley
56 754-3092 V-Belt
57 710-1260A Hex Washer Screw 5/16-18 x .75
58 710-3178 Carriage Bolt 3/8-16 x .75
59 748-3065 Deck Spindle Spacer
60 712-3078 Hex Flange Nut 3/4-16
61 742-3033 Blade
62 710-3008 Hex Cap Screw 5/16-18 x .75
63 714-0115 Cotter Pin
REF.
NO.
PART
NO. DESCRIPTION
IMPORTANT: For a proper working machine, use Factory Approved Parts.
V-Belts are specially designed to engage and disengage safely. A substitute (non OEM) V-belt can be dangerous
by not disengaging completely.
NOTE: For painted parts, please refer to
the list of color codes below. Please add the
applicable color code, wherever needed, to
the part number to order a replacement part.
For instance, if a part, numbered 700-xxxx,
is painted Oyster Gray, the part number to
order would be 700-xxxx-0662.
Oyster Gray: 0662
Powder Black: 0637