Westinghouse LCD-TV - Manual (Page 12)

11
Programming TV Channels
Press the MENU button at the center of the remote. The command to automatically scan for program
channels is located in the TV menu and labeled CH-SCAN.
You can now watch TV. Change channels by pressing the channel up and down buttons CH and
CH .
+
Enjoying Wide-Format Movies
As NTSC transitions to HDTV, you may experience a variety of content presented in different aspect
ratios. This LCD-TV can scale the incoming video while maintaining the original aspect ratio or
stretch the video to use the entire screen.
Use the SCALING button on the remote control to switch the aspect ratio as indicated here:
Use FILL ALL to stretch programs to occupy more of the screen. Use FILL ALL to view wide
format (anamorphic) DVD movies. In particular, look for DVD movies that are labeled:
"Anamorphic Widescreen" or "Enhanced for 16:9 TV" to obtain better performance.
Use 4:3 MODE to maintain the correct original aspect ratio for most videotape, broadcast television,
cable, satellite, HDTV and PC content. The unused portions on the left and right or top and bottom
edges of the screen will appear black.
TV
CCD
V-CHIP
CHANGE PASSWORD
CH SCAN
CATV / AIR
OFF
CABLE
CH ADD/DEL +
TV
CCD
V-CHIP
CHANGE PASSWORD
CH SCAN
CATV / AIR
OFF
CABLE
CH ADD/DEL +
22
27" Wide-Format LCD-TV User Manual