Whynter MF-1800 User Manual
Page 4
OPERATING INSTRUCTIONS
1.
Place fan on a flat, hard and stable surface.
2.
Plug the GFCI plug into a standard 120volt AC outlet with ground.
3.
Attach the 1” hose adapter to any 1” garden hose or spigot.
4.
Press the red button to turn on fan to desired speed.
5.
Speed control: Press the red button at the back of the fan to adjust fan speed (Low,
Medium, or High)
6.
Turn on water at spigot.
7.
To adjust airflow upward or downward: Tilt the fan head.
IMPORTANT:
Spray angle and droplet size is determined by water pressure at your location.
Note: Your Whynter Outdoor misting fan will use approximately 9 gallons of water for each hour
of operation. This is equivalent to running a typical garden hose for 1 minute.
CLEANING
WARNING:
Electric shock hazard---Unplug from electrical supply source before cleaning.
FAN BODY: Use soft damp cloth then wipe with dry cloth. Do not use harmful cleaner to paints
or plastics. Do not bend blades.
NOZZLES: Because of the extremely small size of the nozzle opening, some of the misting
nozzles may eventually be clogged from hard water-deposit build up. If this should occur, the
nozzles should be removed and soaked in a non-toxic cleaning or dissolvent solution such as white
vinegar for 3 hours.
IMPORTANT:
Never attempt to clear nozzles with pins, nails or other metal sharp objects as this
can damage the misting nozzles.
MAINTENANCE
Please make sure that the fan is unplugged from the electrical socket before attempting any
cleaning or maintenance.
Model
Watts
（
W
）
Amps
（
A
）
Volts
Low
Med
High
Low
Med
High
MF-1800
108
120
160
0.92
1.0
1.2
120V
～
60Hz