Williams Sound R31 - Manual (Page 6)

6
1. Install two (2) AA batteries. If you’re using rechargeable batteries, they must be charged before
using. See battery information on page 13.
2. Plug the microphone cord into the “Mic” jack on top of the transmitter.
3. Place the transmitter in the belt clip case provided.
4. Slide the Power Switch on top of the transmitter to “On.” The Power ON LED indicator should illu-
minate Red.
5. The microphone should be placed as close to the speaker’s mouth as is practical. For lapel mics, attach
the microphone to a collar, lapel, or tie.
6. When you are ready to speak, turn the Mic Mute Switch (speaker icon) to the “On” position. When you are done
speaking, mute the mic by turning the Mute Switch to the “Off” position (speaker icon with line through it).
The transmitter can be placed in a pants pocket, or clipped onto a belt or waistband.
Yes Yes No
The PFM System comes with an omnidirectional, lapel-clip style microphone. It should be
clipped to a collar, lapel, tie, or neckline as close to the mouth as possible and centered
on the body as shown.
F IGURE 4: C ORRECT M ICROPHONE P LACEMENT
Note On The Transmitter Antenna:
The microphone cord is the transmitting antenna. Do not bunch up the cord or wrap it
around the transmitter. For maximum range, the cord should hang as straight as possible.
U
SING
T
HE
PFM T32 T
RANSMITTER
F IGURE 3: T32 T OP V IEW