SINBO SHB 3057 - Manual (Page 8)

- 7 -
PARTS DESCRIPTION
HOW TO USE THE APPLIANCE
1. Clean all the parts before using the product for the first time.
2. Before inserting the cup to the housing, make sure the power cord is unplugged from
the power outlet and the knob is in “0” position.
3. Care is needed when handling cutting blades, especially when removing the blade
from the bowl, emptying the bowl and during cleaning.
4. To chop food into strip, place the blade tray(1a) of strip to the rotor. Place the prepared
food into the cup and set the selector to the desired speed, turning it clockwise. Press
the cup cover downward the cup until the food is completely chopped.
5. To chop food into the piece, place the blade tray(1b) of pieces(the inverse of the strip
blade) to the rotor. Operated as the same of point 3.
6. To chop the food to broken, place the stainless steel blade(2) to the rotor. Operated
as the same of point 3.
7. To mix the food, place the plastic mix blade(4) to the rotor. Operated as the same of
point 3.
8. After using, please turn off the switch then unplug the power cord from the wall outlet.
And clean all the appliance parts.
9. Stainless steel blade
10. Blade bushing
11. Plastic blade
12. Rotor
13. Wring head
14. Filter
15. Gear shaft
16. Gear 1. Push cover
2. Plastic plate
3. Cup cover
4. Cup
5. Base
6. Switch knob
7. Base cover
8. Blade
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16