Wells WVOC-G136 - Manual (Page 23)

CLEANING INSTRUCTIONS (continued)
21
CAUTION:
ELECTRIC
SHOCK HAZARD
Disconnect appliance from
electric power before
cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces
can be hot to the touch
and may cause burns. Allow
appliance to cool before
cleaning.
IMPORTANT:
Never allow PRE-FILTER or
FILTER PACK to get wet.
DO NOT wash either of these
two filters. Washing these
filters will ruin them and cause
the appliance to shut-down.
IMPORTANT:
DO NOT spill or pour water
into controls, control panel,
wiring or coil-type hotplate
elements. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
IMPORTANT:
DO NOT use steel wool or
metal implements to clean
cabinet surfaces.
VENTILATOR MONTHLY CLEANING
PREPARATION:
Disconnect appliance from electric power
Allow to cool before cleaning
FREQUENCY:
Monthly
TOOLS: Warm water and a mild detergent
Soft
clean cloth or sponge
Plastic scouring pad, plastic scraper
Container for disposal of grease
EXTERIOR
1. Wash exterior surfaces with a soft clean cloth or sponge dampened
with warm water, mild soap or detergent.
2. Rinse with a soft clean cloth or sponge dampened with warm
water. Allow to air dry.
INTERIOR:
3. In addition to the weekly cleaning procedure, remove the filter
pack.
4. Cover the griddle section.
5. Wash the interior surfaces of the ventilator with warm water, mild
soap or detergent and a clean, soft cloth or sponge. Stubborn or
burned-on food debris bay be removed with a plastic scouring pad
or plastic scraper.
6. Dry thoroughly with a clean soft cloth.
7. Uncover the griddle and reassemble the ventilator.
Procedure is complete.
509 3059
36 O
p
M
W
V
OC-G
136