Weed Eater 96024000100 - Manual (Page 9)

9

CHECKLIST
Before you operate your new riding mower,
we wish to assure that you receive the best
performance and satisfaction from this
Quality Product.
Please review the following checklist:
 All assembly instructions have been
completed.
 No remaining loose parts in carton.
 Battery is properly connected.
 Seat is adjusted comfortably and tight-
ened securely.
 All tires are properly inflated. (For ship-
ping purposes, the tires were overinflated
at the factory).
 Be sure mower deck is properly leveled
side-to-side/front-to-rear for best cutting
results. (Tires must be properly inflated
for leveling).
 Check mower belt. Be sure it is routed
properly around pulleys and inside all belt
keepers.
 Check wiring. See that all connections
are still secure and wires are properly
clamped.
 Before driving riding mower, be sure free-
wheel control is in “transmission engaged”
position (see “TO TRANSPORT” in the
Operation section of this manual).
While learning how to use your riding mower,
pay extra attention to the following important
items:
 Engine oil is at proper level.
 Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
 Become familiar with all controls, their
location and function. Operate them
before you start the engine.
 Be sure brake system is in safe operating
condition.
 Be sure Operator Presence System and
Reverse Operation System (ROS) are
working properly (See the Operation and
Maintenance sections in this manual).