Wolfgang Puck WPMFP15 - Manual (Page 8)

Assembling Your Attachments
13 14
Reversible Grating, Shaving
and Shredding Blades
1 Place the processor bowl on the motor
base as indicated in figures 1 and 2.
2 Select the ‘Reversible’ disc of your choice
- Shredding (fine or coarse), Grating or
Shaving, or the julienne disc and fit over
the Spindle. See figure 5.
Warning: Use caution as the blades are sharp.
4 Fit the processing cover to the processing
bowl as previously shown in figure 3 and
place the food pusher in the feed tube.
5 Plug the power cord into a 120V AC
power outlet.
6 Start processing using the On/Off or
Pulse buttons.
7 When processing is complete, remove the
disc and Spindle from the processing bowl
before removing the processed food.
continued
Variable Slicing Blade
1 Place the processor bowl on the motor
base as indicated in figures 1 and 2.
2 Fit the slicing disc over the Spindle, see
figure 6.
Warning: Use caution as the blades are sharp.
3 The Slicing blade will adjust from 0 - 7mm
in thickness. To adjust the Slicing Blade,
hold the blade by grasping the finger hole
and turn the center Spindle to the desired
thickness. See figure 2.
4 Fit the processing cover to the processing
bowl as previously shown in figure 3 and
place the food pusher in the feed tube.
5 Plug the power cord into 120V AC power
outlet.
6 Start processing using the On/Off or Pulse
buttons.
When processing is complete, remove the disc
and Spindle from the processing bowl before
removing the processed food.
Assembling Your Attachments
continued
figure 5 figure 6
FG_FoodProc Manual2 7/7/06 3:54 PM Page 15