Williams Sound TGS R7 - Manual (Page 2)

FM Tour Guide
Receiver, Model TGS R7
©2005, Williams Sound Corp. MCAT 038A
Williams Sound ®
Helping People Hear 2
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
The receiver shall be housed in an impact resistant plastic case with a hinged battery door that does not separate from
the receiver. The receivers shall be a body-pack type and include a belt-clip case for hands-free operation. The receiv-
er shall have a 3.5 mm mono phone jack and accommodate low-impedance mono earphones, headphones and neck-
loop telecoil couplers. The 3.5 mm phone jack shall also serve as a charging jack for rechargeable batteries.
Receiver frequencies shall be pre-tuned and adjustable by means of an internal tuning coil. A four-channel receiver
model shall be available for use with the system.
The receivers shall receive FM signals in the 72-76 MHz audio assistance band with 75 µS de-emphasis. The receivers
shall provide a maximum output of 250 mW at 16 ohms with an earbud-type earphone. The system electrical frequen-
cy response shall be 100 Hz to 10 kHz, ±3 dB and the signal-to-noise ratio shall be 50 dB at 10 µV.
The receiver shall be covered by a five-year parts and labor warranty, excluding earphones, headphones, batteries and
chargers. The receiver model shall be the Williams Sound Corp. model TGS R7.
Bid Specs: