Whirlpool KEBS247D - Manual (Page 8)

8
(single
ovens)
OR
Starting an operation
After programming a function, you must
press the Start pad to start
the function. If you do not
press the Start pad within
5 seconds of programming, “START?”
will show on the display as a reminder.
Canceling an operation
The Cancel/Off pad will cancel any function,
except for the Clock and Timer
functions. When you press the
Cancel/Off pad, the small
display will show the time of
day, or if Timer is also being
used, the time remaining.
NOTE: To cancel the timer
see page 16.
NOTE: You may hear a fan blowing in the
oven even after you press the Cancel/Off
pad. This is the cooling fan. It will turn
off when the oven cools.
Changing audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell
you when a cycle is completed.
To change pitch and loudness of
key tone:
PRESS and hold for 5 seconds
A short tone will sound and “Snd” and “Hi” or
“Lo” will appear on the display. Repeat the
step above to change to the other setting.
START
(double
ovens)
CANCEL
OFF
COOK
TIME
To turn on and off end-of-cycle tones and
reminder tones (single or double ovens):
PRESS and hold for 5 seconds
To turn on and off all reminder tones
(single or double ovens):
PRESS and hold for 5 seconds
To turn on and off all tones (double
ovens)/to turn on and off key pad entry
tones (single ovens):
PRESS and hold for 5 seconds
A short tone will sound and “Snd” and “On”
or “OFF” will appear on the display to tell
you the signals have been changed. Repeat
the step above to turn the signals back on.
Selecting an oven
(double ovens)
To choose the oven you want to use, press the
Upper Oven or Lower Oven pad.
Finding out which oven is in use
(on double ovens)
Press the Upper Oven or Lower Oven pad.
Upper oven or lower oven
information will be displayed
and the outer oven cavity
symbol for the oven being
programmed will flash.
U
sing Your Oven
7
SET START •
TIMER
STOP
TIME