Wadia Digital 861 - Manual (Page 4)

INSTALLATION AND SET-UP
Use care in unpacking your Wadia 861 Compact Disc Player. Inspect it for
any shipping damage and call your dealer immediately if any is found.
Do not plug your Wadia 861 Compact Disc Player into an
AC outlet if you find shipping damage.
We advise saving all packing materials so that the unit can be easily and
safely shipped if the need arises.
Provided with the Wadia 861 are the following accessories:
• AC power cord
• Four spiked feet with threaded studs
• Four steel coasters
• RCA/BNC adapter
• Transport Key (for locking/unlocking transport)
• Remote Control
• Three type AAA batteries
Do not tip the unit onto the back panel.
This can damage input and/or output connectors.
Place the Wadia 861 on its side on a surface that will not scratch the side
panel. Use the key found in the accessories kit to unlock the transport laser
assembly as shown on the label on the bottom of the unit.
(Note: the transport key need only be turned a small distance to either lock
or unlock the transport.)
In the event that the unit requires shipping, the transport must be
returned to the locked position.
With the unit still positioned on its side, screw one of the spiked feet into the
bottom of each corner post.
Position the Wadia 861 where you would like it to reside in your system.
We recommend choosing a solid, non-resonant, level surface for best
performance. If this surface is susceptible to damage, place one of the steel
coasters under each spiked foot.
When positioning the Wadia 861, do not tilt the unit forward as it may
cause the laser assembly to become lodged in the disc clamping system.
Wadia 861 COMPACT DISC PLAYER
Unpacking
Accessories
Unlocking the
Transport Mechanism
Installing the
Spiked Feet
4