WatchGuard Technologies FireboxTM System 4.6 User Manual
Page 110
HostWatch
100
2
Browse to locate and select the Logdb file.
By default, log files are stored in the WatchGuard installation directory at C:\Program
Files\WatchGuard\logs. HostWatch loads the log file and begins to replay the activity.
3
To pause the display, click Pause.
4
To restart the display, click Continue.
5
To step through the display one entry at a time, click Pause. Click the right arrow
to step forward through the log. Click the left arrow to step backward through the
log.
6
To change playback properties, select View => Play Back Controls.
7
Type or use the scroll control to change the Sample Time Size interval.
8
Use the slide bar to select a midpoint within the log file to begin playback.
9
Click OK.
Controlling the HostWatch display
You can selectively control the HostWatch display. This feature can be useful for
monitoring the activities of specific hosts, ports, or users.
Viewing specific hosts
From HostWatch:
1
Select View => Filters.
2
Click the Inside Hosts or Outside Hosts tab.
3
Clear the Display All Hosts checkbox.
4
In the New Host field, enter the IP address of the host to watch. Click Add.
Repeat for each host that HostWatch should monitor.
5
Click OK.
Viewing specific ports
From HostWatch:
1
Select View => Filters.
2
Click the Ports tab.
3
Clear the Display All Ports checkbox.
4
In the New Port field, enter the port number to monitor. Click Add.
Repeat for each port that HostWatch should monitor.
5
Click OK.
Viewing authenticated users
From HostWatch:
1
Select View => Filters.
2
Click the Authenticated Users tab.
3
Clear the Display All Authenticated Users checkbox.